• Mumbai
  • info@mhcgrp.com
  • +91 9833896774
Make Appoinment

Patient Monitor
   
Thumb

SPECIFICATIONS

    

    SPO2

  • ● Measurement range: 0-100%
  • ● Accuracy: +2%(70-100%);0-69% unspecified
  • ● Alarm range:0~100%
  • ● Pules Rate range:20-300bpm
 

    ECG

  • ● ECG: Lead mode: 5-lead (R,L,EN,C)
  • ● Waveform: 3 and 7 chanel selectable
  • ● Heart rate range: Adult: 15-300 bpm
  • ● Arrhythmia analysis & St. : YES
 

    TEMPERATURE

  • ● Compatible probe: YSI or CYF
  • ● Measurement range: 5 50°C
                    

    RESPIRATION

  • ● Method: Thoracic impedance between (RA-LL)
  • ● Measurement range: Adult:7-120rpm;
  • ● Neonate/Pediatric: 7150rpm
 

    NIBP

  • ● Method: Digital Automatic oscillometric
  • ● Operation mode :Manual/Automatic/continuous
  • ● Over-pressure Protection : Double Safety Protection
  • ● Alarm: Systolic. Diastolic, Mean

FEATURES
   
  • ● 5 standard parameters: ECG, RESP, NIBP, SPO2,1-TEMP - Real time S-T segment analysis and ARR analysis.
  • ● Multi-display selectable including standard, large font, trend OxyCRG dynamic
  • ● Multi 7-lead ECG waveforms display in phase and capture dynamic waveforms.
  • ● Multi-display selectable including standard, large font, trend OxyCRG dynamic
  • ● Large volume of tabular and graphic trends information storage and easy to recall
  • ● Efficient resistance to interference of Defbrillator.
  • ● Up to 2 hours working capacity of built-in rechargeable battery.
Thumb

ETCO2 Monitor
   
Thumb

SPECIFICATIONS

ETCO2 MONITOR

  • ● The MHC 5200E monitor supports the display of two waveforms      and up to eight parameters using a 4.3 ln Color LCD.
  • ● Standard with sidestream ETCO2, easily change to mainstream by advanced order.

INBUILT ETCO2

  • ● PRINCIPLE OF OPERATION

    Solid state sidestream module. Single beam, non-dispersive infrared (NDIR) absorption, ratiometric measurement.

  • ● INTIALIZATION TIME

    Capnogram within 10Sec., Full specification within 60 sec. Routine calibration is not required. 8 sec zero performed when power on or ambient temperature changing too faster.

  • ● SAMPLING FLOW RATE

    100 ml/min (can be set from 50 to 200m/min). with SPO2 & Respiration

  • ● PRINCIPtE OF OPERATION

    Red/lnfrared absorption